FTIR Accessories
Hardware ProductsSoftware ProductsProduct ManualsApplicationsTechnical PapersCICP BlogFAQsContact Us NowISO 9001:2000

GA Systems 
Custom GA Systems 
GA SS Cells 
GA Specialty Cells 
GA Glass Cells 
Custom GA Cells 
FTIR Accessories 

HomeHardware ProductsFTIR Accessories


FTIR Accessories

Research ATR

  • Research grade VAOI vertical ATR (VAOI = variable angle of incidence)
  • 50% Energy throughput continuously variable angle of incidence (25° to 75°)
  • See-through purge cover for ease of consistent placement of sample holder
  • Interchangeable ATR crystals; ZnSe, Si, Ge, KRS-5 crystals available with 30°, 45°, or 60° angles of incidence
  • Sample pressure controllable via optional torque hex wrench
  • Snug seal in Nicolet FTIR compartments for simple purging

Insider

  • Emission accessory
  • Mounts in sample compartments
  • Requires no instrument modification
  • Accommodates a variety of geometries
  • Usable to 400° C
  • Easy alignment
  • Reference documents available

Vertex

  • Variable angle spectral reflectance accessory
  • 5 - 85º angle of incidence with 1º resolution
  • Factory-calibrated reference dial
  • Easy user-calibration and position lock
  • Simultaneous rotation of sample and mirror planes for constant pathlength
  • Kinematically mounted for stability
  • KBr input/output conditioning lense
  • 50% throughput provides excellent signal to noise resolution
  • Easy interface with most spectrometers

Micropress

  • Microscope compression stage
  • Simplifies FTIR microscopy sample preparation
  • Works with all FTIR microscopes
  • Uses standard windows
  • Eliminates interference fringes
  • Enables quantitatively accurate microscopy sampling
  • Unheated & heated versions

Pacesetter

  • Microprocessor temperature controller
  • Precise temperature control
  • Protect components from overheating
  • Simple, single-use programming
  • Easy to read digital display
  • -200º to 1050º C temperature range
  • Automatic self-tuning
  • 120V or 240V, 50Hz to 60Hz
  • Type K or RTD sensors

Explorer HATR

  • Horizontal variable angle ATR
  • 25º - 85º angle of incidence
  • Sampling of solids, liquids, pastes, and film coatings
  • ZnSe ATR crystal
  • Adjustable effective pathlength
  • Purgeable heated version to 200º C
  • Interchangeable ATR crystals

Hot One

  • High temperature studies of solids in a controlled environment
  • Room temperature to 700°C
  • Potassium Bromide (KBr) window
  • Cable heater
  • Clear Annodized Aluminum
  • Sample Mount - OFHC copper
  • Sample Size - 22mm diameter maximum; 12 mm within OFHC copper mount

[Previous][Up]

Copyright (c) 1994 to 2009 CIC Photonics, Inc. All rights reserved.

request@cicp.com